Document ID: 280209
http://support.veritas.com/docs/280209
E-Mail this document to a colleague
http://support.veritas.com/docs/280209
E-Mail this document to a colleague
10.1 5629 Hotfix 4 - Unable to perform backup to HP WORM Media
Details:
What issue does this hotfix resolve?
This hotfix resolves the following issue:
Which files does this hotfix update?
After installing the hotfix, the attributes of the installed files will change as indicated in the table below. Note that the date and time are stored in Universal Time. When looking at the date and time of the file(s) on the server where the hotfix was installed, they will be converted to local time. Use the Date and Time tool provided by Windows to determine the difference between universal time and local time.
Backup Exec Media Servers:
PVLSVR.EXE can be found under C:\Program Files\VERITAS\Backup Exec\NT (By default):
IPVLAPI.DLL can be found under C:\Program Files\VERITAS\Backup Exec\NT (By default):
How to install this hotfix:
This hotfix must be applied to all Backup Exec media servers. Follow the steps listed under the section titled "Installation Procedures" to install the hotfix.
Special Installation Instructions:
This section contains additional installation instructions for this hotfix.
Installation Procedures:
To install the hotfix on a Backup Exec media server, download the hotfix. A prompt will appear asking whether to open or save the download. Perform either of the following:
Uninstalling the hotfix:
Once installed, this Backup Exec hotfix cannot be uninstalled.
Download Now - 452 K
File Name: be5629RHF4_280209.exe
File Type: Patch
Click Below to Browse the FTP files by Product:
ftp.support.veritas.com/pub/support/products
To which versions of VERITAS Backup Exec (tm) can
this hotfix be applied?
This hotfix can only be applied to the following versions of Backup Exec for Windows Servers:
This hotfix can only be applied to the following versions of Backup Exec for Windows Servers:
Backup Exec 10.1 for Windows
Servers revision 5629
What issue does this hotfix resolve?
This hotfix resolves the following issue:
- Unable to backup to HP WORM Media.
Which files does this hotfix update?
After installing the hotfix, the attributes of the installed files will change as indicated in the table below. Note that the date and time are stored in Universal Time. When looking at the date and time of the file(s) on the server where the hotfix was installed, they will be converted to local time. Use the Date and Time tool provided by Windows to determine the difference between universal time and local time.
Backup Exec Media Servers:
PVLSVR.EXE can be found under C:\Program Files\VERITAS\Backup Exec\NT (By default):
IPVLAPI.DLL can be found under C:\Program Files\VERITAS\Backup Exec\NT (By default):
| File Name | Date | Time | Version | Size (bytes) |
|---|---|---|---|---|
| PVLSVR.EXE | 10/26/05 | 7:58:50 PM | 10.1.5629.4 | 830,016 |
| IPVLAPI.DLL | 10/26/05 | 7:58:48 PM | 10.1.5629.4 | 103,488 |
How to install this hotfix:
This hotfix must be applied to all Backup Exec media servers. Follow the steps listed under the section titled "Installation Procedures" to install the hotfix.
Special Installation Instructions:
This section contains additional installation instructions for this hotfix.
Remote Agent for Windows
Servers
This update does not need to be
installed on remote servers running the Backup Exec Remote Agent for Windows
Servers.
Microsoft
Cluster
Before installing the hotfix to
Backup Exec 10.1 media servers on each node of a Microsoft cluster, stop the
Backup Exec services using "Cluster Administrator."
Central Administration
Servers (CASO only)
Before installing the hotfix on
a Backup Exec Central Administration Server (CAS), communication must be
disabled between the CAS and all Managed Media Servers (MMS).
1. Open the Backup Exec User
interface
2. Click Media Servers
3. Right-click on each MMS and
clear the Communication Enabled option
After the hotfix is installed,
enable communication between the CAS and all MMSs.
1. Open the Backup Exec User
Interface
2. Click Media Servers
3. Right-click on each MMS and
select Communication Enabled
Installation Procedures:
To install the hotfix on a Backup Exec media server, download the hotfix. A prompt will appear asking whether to open or save the download. Perform either of the following:
Select "Open" to automatically
patch the installation of Backup Exec 10.1
- or -
Select "Save" to save the
download to the computer in order to install the hotfix later.
Uninstalling the hotfix:
Once installed, this Backup Exec hotfix cannot be uninstalled.
Download Now - 452 K
File Name: be5629RHF4_280209.exe
File Type: Patch
Click Below to Browse the FTP files by Product:
ftp.support.veritas.com/pub/support/products
Supplemental Material:
| System: Ref.# | Description |
| ETrack: 494872 | MP2HF: Can't backup to an HP WORM Tape |
Products Applied:
Backup Exec for Windows Servers 10d (10.1), 10d (10.1) 5629
Backup Exec for Windows Servers 10d (10.1), 10d (10.1) 5629
Last Updated: November 30 2005 11:04 PM GMT
Expires on: 365 days from publish date
Subscribe to receive critical updates about this document
Expires on: 365 days from publish date
Subscribe to receive critical updates about this document
Subjects:
Backup Exec for Windows Servers
Application: Compatibility, Device Management, Media Management
Device Management: Adding Or Removing Hardware
Equipment: Compatibility, Device Management
Media Management: Media Support
Backup Exec for Windows Servers
Application: Compatibility, Device Management, Media Management
Device Management: Adding Or Removing Hardware
Equipment: Compatibility, Device Management
Media Management: Media Support
Languages:
Russian, English (US), French, German, Spanish, Italian, Japanese, Chinese, Korean
Russian, English (US), French, German, Spanish, Italian, Japanese, Chinese, Korean
Operating Systems:
Windows 2000
Windows 2000
Advanced Server, Advanced Server SP1, Advanced Server SP2, Advanced Server SP3, Advanced Server SP4, Advanced Server Windows Powered, Advanced Server Windows Powered SP1, Advanced Server Windows Powered SP2, Advanced Server Windows Powered SP3, Advanced Server Windows Powered SP4, Datacenter Server, Datacenter Server SP1, Datacenter Server SP2, Datacenter Server SP3, Datacenter Server SP4, Professional, Professional SP1, Professional SP2, Professional SP3, Professional SP4, SAK, Server, Server SP1, Server SP2, Server SP3, Server SP4, Server Windows Powered, Server Windows Powered SP1, Server Windows Powered SP2, Server Windows Powered SP3, Server Windows Powered SP4
Windows XP
5.2, Pro 5.1, Pro 5.1 SP1, Pro 5.1 SP2
Windows Server 2003
DataCenter, DataCenter SP1, Enterprise Server, Enterprise ServerSP1, Standard Server, Standard Server SP1, Storage Server, Storage Server SP1, Web Server, Web Server SP1
Symantec World Headquarters:
20330 Stevens Creek Blvd. Cupertino, CA 95014
World Wide Web: http://www.symantec.com,
Tech Support Web: http://entsupport.symantec.com,
E-Mail Support: http://seer.entsupport.symantec.com/email_forms,
FTP: ftp://ftp.entsupport.symantec.com or http://ftp.entsupport.symantec.com
20330 Stevens Creek Blvd. Cupertino, CA 95014
World Wide Web: http://www.symantec.com,
Tech Support Web: http://entsupport.symantec.com,
E-Mail Support: http://seer.entsupport.symantec.com/email_forms,
FTP: ftp://ftp.entsupport.symantec.com or http://ftp.entsupport.symantec.com
THE INFORMATION PROVIDED IN THE SYMANTEC SOFTWARE KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. SYMANTEC SOFTWARE DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SYMANTEC SOFTWARE OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES,EVEN IF SYMANTEC SOFTWARE OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.