To which versions of VERITAS Backup Exec (tm) for Windows Servers can this hotfix be applied?

This hotfix can only be applied to the following versions of Backup Exec for Windows Servers:

Backup Exec 9.0 for Windows Servers revision 4454

Note:  Backup Exec 9.0 for Windows Servers revision 4454 Service Pack 1 is required to install this hotfix.


What issue does this hotfix resolve?

This hotfix resolves the following issues:

An upgrade to Backup Exec 9.1 rev. 4691 for Windows Servers is recommended to address the remaining security vulnerabilities.

Which files does this hotfix update?

After installing the hotfix, the attributes of the installed files will change as indicated in the table below. Note that the date and time are stored in Universal Time. When looking at the date and time of the file(s) on the server where the hotfix was installed, they will be converted to local time. Use the Date and Time tool provided by Windows to determine the difference between universal time and local time.

Backup Exec Media Servers:

Under C:\Program Files\VERITAS\Backup Exec\NT (By default):
 

File Name	Date	Time	Version	Size
bengine.exe	06/03/05	4:13:36 PM	9.0.4454.31	1,411,216
beremote.exe	06/03/05	4:13:32 PM	9.0.4454.31	300,688
beserver.exe	06/03/05	4:15:50 PM	9.0.4454.31	2,038,416
beclass.dll	06/03/05	4:08:22 PM	9.0.4454.31	398,480
ndmpcomm.dll	06/03/05	4:13:28 PM	9.0.4454.31	65,168
ndmpsrvr.dll	06/03/05	4:13:28 PM	9.0.4454.31	841,872

Remote Agent for Windows Servers:

Under C:\Program Files\VERITAS\Backup Exec\RANT:
 

File Name	Date	Time	Version	Size
beremote.exe	06/03/05	4:13:32 PM	9.0.4454.31	300,688
beclass.dll	06/03/05	4:08:22 PM	9.0.4454.31	398,480
ndmpcomm.dll	06/03/05	4:13:28 PM	9.0.4454.31	65,168
ndmpsrvr.dll	06/03/05	4:13:28 PM	9.0.4454.31	841,872

How to install this hotfix:

This hotfix must be applied to all Backup Exec media servers.  Follow the steps listed under the section titled "Installation Procedures" to install the hotfix.

Special Installation Instructions:

This section contains additional installation instructions for this hotfix.

After installing this Hotfix to the Backup Exec 9.x media server, install the Remote Agent for Windows Servers (RAWS) to all of the remote computers protected by Backup Exec by following the Remote Agent for Windows Servers installation procedure in the Backup Exec Administrator's Guide. If RAWS is installed on a SAP R/3 computer, or on a 64 bit (Itanium) computer, see the Special Installation Instructions below.

After installing this hotfix to the Backup Exec 9.x media server, you must reinstall the "Remote Agent for Windows Servers" to all 64 bit computers being protected by Backup Exec. To reinstall the Remote Agent, type the following from the 64 bit computer:

Note 1: <path> = path to the \Backup Exec\NT\Agents\RANT64 directory on the Backup Exec media server

Note 2: This service pack can only patch previous installations of the Backup Exec Remote Agent 64bit (it does not patch the original installation source files for the Remote Agent for 64 bit computers). This service pack places a "patch" file (RAWS64.msp) in the \Backup Exec\NT\Agents\RANT64 directory on the media server. If installing the Backup Exec Remote Agent for 64 bit computers to additional 64 bit computers in the future, run the command above after the initial agent installation to install the patch.

Before installing the hotfix to Backup Exec 9.0 media servers on each node of a Microsoft cluster, stop the Backup Exec services using "Cluster Administrator".

After installing this hotfix to the Backup Exec 9.0 media server, you must reinstall the "Remote Agent for Windows Servers" to all SAP R/3 computers being protected by Backup Exec. To reinstall the Remote Agent, type the following from the SAP R/3 server:

Note 1: <path> = path to the \Backup Exec\NT\Agents\R3 directory on the Backup Exec media server

Note 2: This service pack can only patch previous installations of the Backup Exec Agent for R/3 for Oracle (it does not patch the original installation source files for the Agent for R/3 for Oracle). This service pack places a "patch" file (SAPR3.msp) in the \Backup Exec\NT\Agents\R3 directory on the media server. If installing the Backup Exec Agent for R/3 for Oracle to additional SAP R/3 computers in the future, run the command above after the initial agent installation to install the patch.

Installation Procedures:

To install the hotfix on a Backup Exec media server, download the hotfix. A prompt will appear asking whether to open or save the download. Perform either of the following:

Select "Open" to automatically patch the installation of Backup Exec 9.0

- or -

Select "Save" to save the download to the computer in order to install the hotfix later


Uninstalling the Hotfix

Once installed, this Backup Exec hotfix cannot be uninstalled.