The error message "V-78-58645-270: Operation failed. The disk cannot be added as a member of a cluster dynamic disk group because it is not on the shared bus" is returned while creating a cluster disk group in Veritas Storage Foundation (tm) for Windows
Details:
***Note******************************************************
You may receive
a similar error message of:
"V-39-58645-525
The disk can not be imported as a member of a cluster disk group because it is
not on a shared bus."
of which the
solution below is also the same solution.
****************************************************************
This error will
occur if Storage Foundation detects that the system disk is sharing the same
port as one of the disks to be imported into the cluster disk group.
To resolve this issue, follow these steps:
1. Open a command
prompt
2. Type
vxclus usesystembus ON and hit
Enter. The following message will appear:
"V-77-57616-50026:
WARNING: By enabling UseSystemBus you are going to create
cluster
diskgroup on the disks which are connected to System/
Boot
bus. Do you want to continue(Y/N)?"
3. Type
y and hit Enter. The following
message will appear:
"V-77-57616-4046:
[hostname] Enabled UseSystemBus support."
These steps will need to be
performed on all nodes in the cluster. It is now possible to create a cluster
disk group without receiving the error.
Products Applied:
Storage Foundation for Windows 4.0, 4.1, 4.2, 4.3, 4.3MP1
Subjects:
Storage Foundation for Windows
Application: Clustering - Mscs, Clustering - Vcs, Command Line Utilities
Languages:
English (US)
Operating Systems:
Windows 2000Advanced Server, Datacenter Server, Server
Windows Server 2003
DataCenter, Standard Server
THE INFORMATION PROVIDED IN THE SYMANTEC SOFTWARE KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. SYMANTEC SOFTWARE DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SYMANTEC SOFTWARE OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES,EVEN IF SYMANTEC SOFTWARE OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.