Document ID: 267182
http://support.veritas.com/docs/267182
E-Mail this document to a colleague
http://support.veritas.com/docs/267182
E-Mail this document to a colleague
Release Notes for VERITAS Backup Exec (tm) 9.1 for Windows Servers revision 4691 - Service Pack 1
Details:
Service Pack 1 contains previously released hotfixes for Backup Exec 9.1 for Windows Servers revision 4691. A complete list of hotfixes contained in this service pack are listed below:
Important Note: HotFix 1 for Backup Exec 9.1 for Windows Servers revision 4691 is not included in this Service Pack. HotFix 1 enables support for the Backup Exec Desktop and Laptop Option. To enable support for the Desktop and Laptop Option, install HotFix 1 from http://support.veritas.com/docs/264677 .
Notes:
1. After the service pack is installed, Intelligent Disaster Recovery (IDR) bootable media must be recreated.
Service Pack 1 contains previously released hotfixes for Backup Exec 9.1 for Windows Servers revision 4691. A complete list of hotfixes contained in this service pack are listed below:
Important Note: HotFix 1 for Backup Exec 9.1 for Windows Servers revision 4691 is not included in this Service Pack. HotFix 1 enables support for the Backup Exec Desktop and Laptop Option. To enable support for the Desktop and Laptop Option, install HotFix 1 from http://support.veritas.com/docs/264677 .
| HotFix # | Product Area | Description | Notes |
|---|---|---|---|
| 2 | BEMCMD.EXE | Jobs created with Backup Exec Command Line Applet (BEMCMD) to back up Windows 2003 Shadow Copy components fail with the Backup Exec "Final Error Code: a000fed3" and "Final Error Description: A failure occurred setting the Component backup status" error messages when run | |
| 3 | Media Management | Media that is not appendable is incorrectly displayed with an "Infinite Overwrite Protection" Media that is not appendable is incorrectly displayed with an "Infinite Overwrite Protection" | |
| 4 | NetWare | A push installation of the Remote Agent for Windows Servers (RAWS) displays the following error message: "Unable to load "c:\......\Resdll.dll. Unable to find the specified module" | |
| 6 | Intelligent Disaster Recovery/IBM Tape Drives | A. Append jobs fail on IBM 3590E11 (and 3592) | 1 |
| B. When the Intelligent Disaster Recovery (IDR) option is installed, remote backups produce a DR. Watson in the Remote Agent for Windows Servers (BEREMOTE.EXE) | |||
| 8 | Small Business Server | Entering a Small Business Server (SBS) Library Expansion Option (LEO) serial number during the Backup Exec installation does not enable support for additional robotic library drives | |
| 9 | Advanced Open File Option | After installing Hotfix 6, the Advanced Open File Option cannot be installed | |
| 11 | Multiple Issues | A. Event ID 34322 appears in the Application Log of the Event Viewer every 6 hours for no apparent reason. The error message in the Event is "Access to catalog file C\VERITAS\Backup Exec\NT\Catalogs\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}.U01 failed. Reason: Not enough storage is available to process this command." | |
| B. Backing up a remote computer returns the error "Unable to attach" in the job log if there is a Global Exclude for the remote computer. The Remote Agent debug log reports "LogonUser failed: The parameter is incorrect.". The Backup Exec media server debug log reports "ERROR: Error: Connection has not been authorized" | |||
| C. On a domain controller with a long domain name, the UNC path to Sysvol is not being handled correctly during backup. The error message reported is "A failure occurred reading an object. WARNING: "Shadow?Copy?Components\System?State\SYSVOL\SYSVOL\XXXX-XXXX-XXXX-XXXXXXXXXXXXXXXX" is a corrupt file. This file cannot verify. Database or database element is corrupt" | |||
| 12 | NetWare | Canceling a backup job of a remote Windows computer running the Remote Agent for Windows Server (RAWS) from Backup Exec for NetWare fails and the job hangs | |
| 14 | Intelligent Disaster Recovery/NetWare Job Logs | A. If the Backup Exec Intelligent Disaster Recovery (IDR) option is installed and enabled, a backup of the Windows System State modifies the Services file | 1 |
| B. After performing a local IDR of a computer in a Microsoft cluster, attempting to log on to Windows produces the error '0x80004005'. This issue only occurs when IDR "Assisted" or "Manual" mode was selected when performing the IDR. | 1 | ||
| C. When performing an IDR using a bootable tape drive, the Sysvol directory is not restored and the following error is reported: "Unable to restore the directory /system state/sysvol/sysvol" | 1 | ||
| D. When performing an IDR of a Japanese language Windows operating system, "BEDRWIZ.EXE" will generate an application error. This only occurs when the computer has dynamic disks and when manually using Copyidr.cmd to perform the IDR. | 1 | ||
| E. After performing an IDR of a local computer, the "Startup Type" of some services revert back to their default setting | 1 | ||
| F. When viewing the Backup Exec Job Log that contains a backup of a NetWare server, the Job Log generates the error 'Load XML failed" | |||
| 15 | Shared Storage Option | Device reservation conflict occurring when using the Shared Storage Option (SSO), large robotic library mulitple drive configuration | |
| 17 | Alert and Notification | Catalog errors occur every 6 hours with no apparent cause and fill the Alert History and ExecView with alerts |
Notes:
1. After the service pack is installed, Intelligent Disaster Recovery (IDR) bootable media must be recreated.
Related Documents:
http://support.veritas.com/docs/258104
http://support.veritas.com/docs/258576
http://support.veritas.com/docs/264658
http://support.veritas.com/docs/264677
http://support.veritas.com/docs/267690
http://support.veritas.com/docs/258104
http://support.veritas.com/docs/258576
http://support.veritas.com/docs/264658
http://support.veritas.com/docs/264677
http://support.veritas.com/docs/267690
Products Applied:
Backup Exec for Windows Servers 9.1, 9.1 4691, 9.1 4691 SP1
Backup Exec for Windows Servers 9.1, 9.1 4691, 9.1 4691 SP1
Last Updated: July 22 2004 07:05 PM GMT
Expires on: 365 days from publish date
Subscribe to receive critical updates about this document
Expires on: 365 days from publish date
Subscribe to receive critical updates about this document
Subjects:
Backup Exec for Windows Servers
Application: Release Notes
Backup Exec for Windows Servers
Application: Release Notes
Languages:
English (US), French, German, Spanish, Italian, Japanese, Chinese
English (US), French, German, Spanish, Italian, Japanese, Chinese
Operating Systems:
Windows 2000
Windows 2000
Advanced Server SP3, Advanced Server SP4, Advanced Server Windows Powered SP3, Advanced Server Windows Powered SP4, Datacenter Server SP3, Datacenter Server SP4, Professional SP3, Professional SP4, Server SP3, Server SP4, Server Windows Powered SP3, Server Windows Powered SP4
Windows NT
4.0 Server SP6a, 4.0 Workstation SP6a
Windows NT Small Business Server
2000, 4.5
Windows XP
Pro 5.1
Windows Server 2003
DataCenter, Enterprise Server, Standard Server, Storage Server, Web Server
Windows Small Business Server 2003
Premium Edition, Standard Edition
Symantec World Headquarters:
20330 Stevens Creek Blvd. Cupertino, CA 95014
World Wide Web: http://www.symantec.com,
Tech Support Web: http://entsupport.symantec.com,
E-Mail Support: http://seer.entsupport.symantec.com/email_forms,
FTP: ftp://ftp.entsupport.symantec.com or http://ftp.entsupport.symantec.com
20330 Stevens Creek Blvd. Cupertino, CA 95014
World Wide Web: http://www.symantec.com,
Tech Support Web: http://entsupport.symantec.com,
E-Mail Support: http://seer.entsupport.symantec.com/email_forms,
FTP: ftp://ftp.entsupport.symantec.com or http://ftp.entsupport.symantec.com
THE INFORMATION PROVIDED IN THE SYMANTEC SOFTWARE KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. SYMANTEC SOFTWARE DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SYMANTEC SOFTWARE OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES,EVEN IF SYMANTEC SOFTWARE OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.